Reolink Duo 3 PoE 16MP 180° Dual-Lens PoE Camera

HK$1,699.00
  • Outdoor entrances
  • Gardens & yards
  • Open-plan spaces

Pickup available at Elechid

Usually ready in 24 hours

Reolink Duo 3 PoE combines 16MP detail with a 180° dual-lens panorama and infrared night vision. Record broad scenes locally through microSD or a compatible Reolink NVR.

Suitable uses

Suitable for a shop entrance, corridor or viewpoint with planned network cabling. Plan the PoE connection around the site’s power and network equipment and the recording methods listed here; check recorder model and firmware compatibility.

Selection tip: where it fits and when to compare another model

Consider this for an outdoor entrance, yard or shop approach where a fixed wide overview and a planned wired connection suit the job. Its PoE connection needs a suitable powered source; an ordinary router port alone is insufficient. If the position is indoors and you need to turn the view or optically zoom into a smaller area, compare E1 Zoom 4K indoor pan-tilt and optical zoom. If the position also needs a wall light and mains electrical installation is practical, compare LC3 wall-light camera. These are alternative directions, not a promise that they share a recorder.

Key features

  • Dual 2.8mm lenses; 180° panoramic view defines the camera's coverage so you can match its view to the installation position.
  • Power over Ethernet carries data and power on one network cable, making the cable route easier to plan around the mounting position.
  • Local recording lets you keep footage on a suitable microSD card or compatible Reolink recorder, with continuous, scheduled and event recording options.
  • Infrared night vision is rated up to 30m, helping maintain a view after dark; actual results depend on the scene.

Specifications

Image 16MP; 7680 × 2160 at up to 20fps
Lens / view Dual 2.8mm lenses; 180° panoramic view
Connection Wired Ethernet; active PoE (802.3af)
Local recording microSD / compatible Reolink NVR
Night vision Infrared up to 30m
Model reference PCDUOB8K06

Package and requirements

One Duo 3 PoE camera; final regional mounting accessories and cable contents should be confirmed against the supplied carton.

A suitable IEEE 802.3af active PoE source and Ethernet cabling are required. Confirm recorder hardware and firmware compatibility before purchase. Memory card and recorder are separate unless expressly supplied. Recording duration depends on capacity, bitrate and recording settings.

Compare and plan your system

Browse compare security cameras and recorders and security camera accessories; for another model, see Reolink TrackMix PoE camera.

For manufacturer information, see official product information.

Choosing a monitoring system? Read our Hong Kong home CCTV buying guide to compare power, connectivity and recording options, or browse security cameras and IP cameras.

Before ordering, use our how to choose different cameras for the living room, entrance and rooftop; first CCTV order checklist: power, recording and necessary accessories to list each viewpoint and the equipment requirements to confirm.

When it arrives: first setup and checks

  1. Power up in an accessible position, and check package contents. Use the exact model's manufacturer instructions and app prompts to add it. Do not substitute another version's pairing or reset procedure.
  2. Use the compatible PoE equipment or specified power source required by this model, with an Ethernet connection. An ordinary router LAN port does not imply PoE power.
  3. Configure account/device security and viewing permissions using this model’s supported settings. Check date, time, notifications and framing.
  4. Enable a supported card, NVR/hub or cloud recording method. Test recording, playback and storage location before permanent mounting. Live view does not mean recording is active.

Setup reference: Reolink manufacturer setup and support Choose the matching model and hardware version. This self-setup checklist does not include on-site or done-for-you setup services.